SAPPHIRE PULSE AMD Radeon RX 7600 Photos Reveal Dual-Fan, Dual-Slot Design

The FPS Review may receive a commission if you purchase something after clicking a link in this article.


Official product shots of the SAPPHIRE PULSE AMD Radeon RX 7600 have surfaced online, providing an early glimpse at AMD’s third RDNA 3 graphics card for gamers ahead of its rumored launch later this month. As suspected, the PULSE AMD Radeon RX 7600 will feature a shroud with the same black and red aesthetic that can be seen in SAPPHIRE’s existing and more powerful PULSE AMD Radeon RX 7900 XT and PULSE AMD Radeon RX 7900 XTX options, but with a dual-fan, dual-slot design. One photo also provides a clear shot of the box, which can confirm 8 GB of memory, 32 RDNA 3 Compute Units, and other features.

From a VideoCardz report:

What the box does not say are the GPU and memory clocks, as well as the memory bus. The bus is what might limit the card’s capability because it is reportedly just 128-bit wide. Furthermore, AMD Navi 33 only supports up to 8 lanes in PCIe Express 4.0 standard.

The card is confirmed to feature one 8-pin power connector, and therefore the whole card should not require more than 150W (8-pin) + 75W (PCIe). In reality, it will almost certainly require less power. Worth noting that the mobile Navi33 SKUs do not exceed 120W TGP (RX 7600M XT).

Image: SAPPHIRE/VideoCardz
Image: SAPPHIRE/VideoCardz
Image: SAPPHIRE/VideoCardz

Join the discussion in our forums...

Tsing Mui
News poster at The FPS Review.

Recent News