In partnership with BioWare, NZXT has unveiled what is most certainly Commander Shepard’s favorite PC case on the Citadel: the H510i Mass Effect. This is a limited-edition, compact mid-tower ATX case that features design elements inspired by the franchise’s iconic N7 armor.
“The H510i Mass Effect equips your build with N7 protective gear, featuring a kinetic armor theme and the iconic N7 logo and stripe,” NZXT wrote. “A two-sided charm enables you to display your true colors with the choice of either a Paragon or Renegade logo.”
The case features a tempered-glass side panel, two Aer F 120 mm fans, removable filters for the PSU, a front bracket designed for radiators up to 280 mm, and an integrated reservoir mount for custom-loop systems.
NZXT’s H510i Mass Effect is available for purchase now on its website for $199.99. With this being a collector’s item (limit two per order), interested parties might want to act quickly.
Anyone know how to unlock the romance option for this case?— NZXT (@NZXT) November 8, 2020
😚 https://t.co/pPG3TT0xrH pic.twitter.com/5TGVDqd0Vc
|Dimensions||W: 210mm H: 460mm D: 428mm (with feet)|
|Material(s)||SGCC steel, tempered glass|
|Motherboard Support||Mini-ITX, MicroATX, ATX|
|Front I/O Ports||1x USB 3.1 Gen 2 Type-C|
1x USB 3.1 Gen 1 Type-A
1x Headset Audio Jack
|Filters||All air intakes|
|Smart Device V2||3x Fan channels with max 10W per channel output*|
2x RGB LED port support up to
4x NZXT addressable LED strips or
5x AER RGB fans
Built-in noise detection module
*Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.
|LED Strip(s)||2 integrated addressable LED strips|
|Vertical GPU Mount||2 slots|
|Included Accessories||Installation screws|
10x cable ties
1x headset audio jack splitter (4 pole to 3 pole)
|Drive Bays||2.5″: 2+1|
|Radiator Support||Front: 2x 140 or 2x 120mm with Pull|
Rear: 1x 120mm
|Fan Support||Front: 2x 120 / 2x 140mm|
Top: 1x 120 / 1x 140mm (1 Aer F120 case version included)
Rear: 1x 120mm (1 Aer F120 case version included)
|Fan Specs||AER F120 (case version)|
Speed: 1200 ± 200 RPM
Airflow: 50.42 CFM
Noise: 28 dBA
Bearing: Rifle bearing
|Clearance||Cable Management: 19-23mm|
GPU Clearance: Up to 381mm w/o front water cooler installed, Up to 325mm with front water cooler installed.
CPU Cooler: Up to 165mm
Front Radiator: 60mm
Rear Radiator: 60mm
Reservoir & Pump: Up to 180mm (along cable bar), Up to 86mm (along bottom panel)